Specification Checklist
Kitchen cabinet doors wholesale suppliers: fields to compare
Separate the door schedule from the cabinet box schedule. A door that looks similar may differ in finished size, thickness, edge profile, hinge preparation or the face-to-box relationship.
Use this checklist to identify what is fixed, what remains open and what each supplier must describe before you accept an alternative. We support the enquiry as an independent sourcing partner.
What the schedule should identify
Mark all measurements as finished or nominal. Record the unit and drawing revision next to each dimension. Do not convert a supplier's unstated tolerance into an assumed project requirement.
Record width × height × thickness for every door and drawer front, in inch or mm. List overlay or inset arrangement, edge profile, hinge-side orientation and boring details. For example, an enquiry can request a 450 × 720 mm door with thickness left for supplier confirmation; this is an illustrative input format, not an offered product or a standard size.
Identify solid wood, veneer, painted or laminated construction as required, including the core and edge treatment. A painted front may suit a uniform appearance, while visible grain requires a species and matching reference. Ask for front and back finish descriptions, sheen, color reference and exposed-edge treatment rather than relying on one photograph.
State the hinge or mounting requirement and any existing hardware that must be retained. Compare the supplier's drilling drawing against the installed interface. Agree a labeled finish sample and keep its reference with the accepted drawing. A color sample does not verify drilling accuracy; a fitted sample does not establish the finish of an entire order.
Use quantities by door code, including replacement allowances only if you specify them. Request separate lines for sample charges, hardware, packaging and delivery. Define who reviews dimensions and finish, what record is used for acceptance and how deviations are approved before supply. Confirm applicable documentation on the exact offered construction.
Open decisions before accepting a substitution
Material & fit
Compare the complete offered construction, finish behavior, fixing interface and intended indoor use. A budget preference can open a material discussion, but it does not authorize a supplier to alter the approved schedule. Ask the responsible designer to accept the proposed change in writing.
No. Check the back, edge, hinge boring and thickness as well as the visible surface. Existing cabinet boxes can limit available replacement choices. List the retained hardware and interface dimensions so the supplier can disclose an incompatibility.
Budget & evidence
State an amount or range, currency and whether it covers one front or the complete order. Note whether hardware, packing, freight or installation are included. Compare a high-end and a budget proposal against the same drawing before deciding whether the finish and service differences justify the cost.
The January 2023 Sauder Cabinetry catalog is a product-family reference for dimensional questions. It does not verify any supplier introduced through this service. Request the proposed supplier's current drawing, material statement and relevant product records for the actual enquiry.
Read the cabinet procurement brief for the shared quote fields, or inspect the inquiry options before sending a schedule.
Put the unresolved fields in your enquiry
Include the door code, finished dimensions, material, finish, hinge preparation and quantity. Tell us the US destination and requested timing, then add any optional budget or supplier preference. Unknown fields should remain visibly open until confirmed.